Made-to-measure corner wardrobes in Cullera

The corner is the spot almost everyone leaves empty in a room, and it is also the one that can work hardest with a made-to-measure corner wardrobe. In Cullera, a corner wardrobe lets you make the most of two walls at once, but it has to solve three things: how you reach the back, how the doors meet at the corner, and what happens with walls that rarely form a perfect angle. Here is how we approach it.

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

What we can solve with a corner wardrobe

Plan · example Floor plan · corner wardrobe
2,60 m 2,10 m 123
1Corner module put to good use 2Doors that don't get in each other's way 3Two fronts with a matching finish

A corner wardrobe turns two walls that meet into a single block of storage. It works when the bedroom is long and narrow and there is no free wall wide enough, when a window takes up half of one side and leaves the other too short, or when a wall has a recess that no straight unit can make use of.

The result is more linear metres of hanging rail and shelving than a straight wardrobe would give you in the same room. It can also hide a pillar or a protruding corner. But it is not a shortcut to extra space: if the corner ends up with no access, that space is lost. That is why, in every proposal, we first think about how you get in and only then about how much fits.

01

L-shaped wardrobe, corner module and continuous fronts

There are three ways to handle the corner. The L-shaped wardrobe joins two straight runs and closes the angle with a corner unit. The rotating corner unit makes use of the dead zone with shelves that swing round. And the continuous front draws a line that turns the corner without a break, in a single finish.

Each option changes the look. The L-shaped wardrobe with a diagonal corner unit looks softer and makes it easier to get past, while the right angle uses every centimetre but creates a deep corner that needs organising. Before choosing, we draw up the plan with both walls, the thickness of the side panels and the doors, so that the sections of the corner wardrobe line up and join without gaps.

Made-to-measure corner wardrobe with white doors and oak handles in a bright bedroom in Cullera
02

How to reach the back without creating unusable areas

The biggest complaint about a corner wardrobe is the space at the back that nobody can reach. There are practical solutions: pull-round tray-style shelves, pull-out baskets, a unit with its own door at the corner, or a reserved space for things you rarely use, such as suitcases or out-of-season clothes.

You can also arrange the hanging space towards the two arms of the wardrobe, so that clothes sit next to the openings and the corner is used for fixed shelves or a top cupboard. The key is not to fill the corner with rails you can never reach. In Cullera, if you have a bedroom with a free corner behind the door, you can usually gain a useful unit as long as each corner is given a clear function.

Have you already measured the space?

Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.

03

Doors and drawers that don't get in each other's way

  • 01

    At the corner of an L-shaped wardrobe, two doors can clash or two drawers can block each other. The way to avoid this is to decide which element opens first and leave some clearance. Drawers are placed away from the corner or given a section where only they open.

  • 02

    A common combination is sliding doors on the long arm and hinged doors on the short one, or hinged doors on both with a finishing piece. That finishing piece, a fixed panel or a corner post, leaves room for the doors to swing without touching. If the doors are mirrored, we need to make sure the reflection does not visually distort the space. It is a fine adjustment made on the drawing, not on site.

04

Adapting to walls, windows and walkways

A corner is never as clean as it looks. A thick skirting board, a socket at the corner, a radiator half a metre away or a window that starts very close all become constraints. The corner wardrobe is shaped around them with cut-outs, trimmed plinths or filler panels.

If there is a window on one of the arms, the unit stops short or drops in height so it does not cover the glass. If the corner opens onto a walkway, it is worth leaving a chamfer so nobody knocks into the edge. These decisions are made from the measurements, which is why we need details for each wall, not just the opening as a whole. A well-fitted corner wardrobe does not look added on: it looks as if the room always had it.

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

05

What changes when measuring a corner in Cullera

Measuring a corner takes more points than a straight wall. You need to note the length of each arm, the height at both ends and at the corner, and the angle between the walls, which in many rooms is not exactly 90 degrees. A difference of a couple of degrees ends up as a visible gap when the front is closed.

A set square, a tape measure and a spirit level are enough for a first set of measurements. With those you can start in the configurator, entering the two arms and the type of door, and get an approximate estimate. If you decide to go ahead, we arrange the measuring visit, which costs €50 only if you do not place an order. Manufacturing usually takes 2–3 weeks on average.

Made-to-measure white and oak corner wardrobe with one door open, showing a hanging rail, drawers and baskets, in a bright bedroom in Cullera
Measuring visit

Ask us to come and measure up in Cullera

  • 01You leave us your name and your area.
  • 02We message you on WhatsApp to agree a day.
  • 03The measuring visit costs €50 and is free if you place an order.
06

What to check in the design before we build

Before the design goes into production, it is worth checking four things: that each door opens without touching its neighbour, that you can physically reach the back of the corner, that the side panels meet at the corner without leaving a gap, and that the clear space in front of the unit is comfortable to walk through.

A useful trick is to print the plan to scale and mark the outline of the corner wardrobe on the floor with tape. That way you can see how you move around it, whether the bedroom door opens fully and whether the bed is left at a reasonable distance. With that trial run done in your home in Cullera, the corner wardrobe stops being an idea and becomes a volume you can already step into and check before confirming the order.

07

A bedroom, hallway or living-room corner

  • 01

    The same corner wardrobe behaves differently depending on the room. As an example of planning, imagine a room in Cullera where the bed takes up one wall and the other has the door at one end: the corner wardrobe goes in the opposite corner, with a long arm towards the window and a short one next to the door.

  • 02

    In a hallway with a bend, the L-shaped unit makes use of the turn and leaves the way clear if the depth is limited. In a living room, a corner wardrobe works as everyday storage furniture, with lighter doors and tones that harmonise with the rest of the furniture. If you are unsure between these locations, describe the room in the quote form and we will work out which gives the best split between arms.

Enquiry

Tell us about your project in Cullera

  1. 1We read your message and look at your photos.
  2. 2We reply on WhatsApp with a first figure.
  3. 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.

We don't cut a single board until you've approved the design and the price.

Your fitted wardrobe

2 MIN

We'll prepare a WhatsApp message for you. You can review it before sending and attach your photos directly in the chat.

Questions

Frequently asked questions about wardrobes in Cullera

After installation: warranty and care for your wardrobe.

Do you always gain space with a corner wardrobe?

Not always. You gain space when the corner is solved with comfortable access; if you are left with an unreachable back section, that area is lost. That is why we design it starting from how you will get into each part.

How do you organise hanging clothes in a corner?

They hang on the two arms, close to the openings, and the corner is kept for shelves or a top cupboard. That way no garments get trapped in a hard-to-reach corner.

Can you mix sliding and hinged doors in an L-shaped wardrobe?

Yes. It is a very common solution: sliding doors on the long section and hinged doors on the short one. A finishing piece is fitted at the corner so the doors do not clash.

When does an L-shaped wardrobe become a walk-in wardrobe, and what changes?

The L-shaped wardrobe opens from the outside, with doors, and sits against the walls. The L-shaped walk-in wardrobe is walked through from the inside and needs a room or a defined area, with more free space.

What if the walls do not form a right angle?

We measure the real angle and design the side panels or a filler panel so that the front sits straight. With your photos and dimensions we check what adjustment is needed.

Shall we talk about your project?

Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote